Heat Pumps That Heat and Cool in Nahant, MA
One cold-climate system for winter warmth and summer cooling, with Mass Save rebates and 0% HEAT Loan financing lined up for homes in Nahant, Swampscott, Lynn and Revere.
- Towns coveredNahant, Lynn, Swampscott, Saugus and Revere
- Handled for youRebate forms, 0% loan steps, sizing and old boiler removal
Four numbers settled on the first call
Rebate estimate
What the Mass Save heat pump rebate could cover, based on your home and the equipment.
Loan amount
How much a 0% HEAT Loan could carry, up to $25,000, if a participating lender approves it.
Your share
What is left for you to pay once rebates and financing are counted.
System size
Tons of capacity matched to your rooms, not copied from the old boiler.
A no-cost first step
Step one is often a Home Energy Assessment, which is free through Mass Save.
Five Jobs, One Goal: Heat and Cooling From One System
Every project here ends the same way. One heat pump system carries the winter and the summer. How you get there depends on your house, your fuel and your budget. Pick the piece that fits, or call and we will map the whole job.
Heat Pump Installation
Whole-house heat and cooling from cold-climate equipment, ducted or not, matched to each room's load and tested at startup before we hand you the thermostat.
Mass Save Rebate Help
Eligibility checked, the Home Energy Assessment lined up, equipment matched to the qualified list and the rebate forms prepared.
0% HEAT Loan Financing
The 0% HEAT Loan, which can reach up to $25,000 via banks and credit unions in the program, guided from the written proposal to the closing inspection.
Ductless Mini-Splits
Slim indoor units, wall, floor or ceiling style, for houses with radiators or baseboard, chilly additions and attic rooms.
Oil & Gas Heating Replacement
Old oil, propane or gas boilers and furnaces replaced, with the old unit removed, disconnected or wired as a deep-cold backup.
Five Steps, Start to Startup
The call
Your house, your fuel, your utility and what you want fixed. Ten minutes on the phone tells us which programs are worth chasing.
The eligibility check
We hold your house up to the rebate and HEAT Loan rules. When the program wants an energy assessment first, we point you to the booking.
The sizing visit
Rooms, windows, insulation and existing equipment measured. The design follows heat loss, not the size of the old boiler.
The written proposal
One page lists the hardware, the price, the likely rebate and the loan figure. Financing? The application then heads to a lender in the program.
Install and paperwork
Outdoor and indoor units set, controls wired, the old system handled, the system tested and the rebate and loan documents completed.
Why the Numbers Work Out Better Here
A heat pump project has three moving parts: the equipment, the rebate and the financing. Miss one and the math falls apart. We keep all three in the same plan.
Phones open every day
The line is staffed every afternoon into the evening, weekends included, so planning fits after the workday.
Paperwork off your plate
Rebate claims, loan authorizations and whatever a bank wants to see, drafted with you and chased to approval.
Built for real winters
Equipment rated for hard cold, chosen so the system still carries the house through a January snap.
Scope and price on one page
Hardware, labor, expected incentive and financing figure, all itemized ahead of install day. No line you have to guess at.
Nahant and the Towns Along the Shore
Nahant hangs off the coast at the end of the causeway past Nahant Beach, and its older homes take the full force of the wind off the water. We work there and across the nearby towns from Lynn and Swampscott to Revere, Saugus and Malden.
Older houses, careful sizing
Shingled capes, colonials and two-families with original boilers are common around here. Each gets a heat-loss count before we name a system size.
Salt air and wind
Outdoor units near the water are placed with drainage, snow and spray in mind, and mounted so they stay clear through a nor'easter.
Utility first
Most homes nearby buy power from a Mass Save utility. A few towns run their own light plants with separate rebate rules, and we check which applies to you.
Where we install
- NahantNahant BeachHome base
- LynnLynn Woods
- Swampscott
- SaugusRoute 1
- RevereRevere Beach
- SalemSalem Common
- MarbleheadMarblehead HarborLight plant town
- Winthrop
- PeabodyRoute 128/I-95Light plant town
- LynnfieldRoute 128/I-95Light plant town
- MaldenMalden River
In Peabody, Marblehead and Lynnfield the electricity comes from a municipal light plant. That plant sets its own heat pump incentive, and the Mass Save electric rebate does not apply. A HEAT Loan can still be on the table if National Grid or Eversource delivers the gas. Elsewhere in Essex County? Ask anyway.
Check your town and utility: (781) 678-8246Rebate, Loan, Your Share: Three Numbers, One Call
Before you sign anything, you should know what the rebate may cover, what a 0% loan could carry and what is left for you. We work through it with you on the phone and confirm it in writing after the home visit.
Get your three numbers: (781) 678-8246Nothing to sign on the call. Rebates and loans depend on program and lender approval.
Heat Pump and Financing Questions, Answered Short
The questions that come up on almost every call, with straight answers.
Can a heat pump really keep a house warm through a Massachusetts winter?
Yes, provided the unit is a cold-climate design and its capacity comes from a true heat-loss count. That equipment is rated to keep producing heat in serious cold. Air sealing and insulation help them do it with less effort. If you keep the old boiler, integrated controls switch to it only in deep cold.
How does 0% financing through the HEAT Loan work?
It is a Mass Save program loan at 0% interest, up to $25,000, made by banks and credit unions that take part. The checklist: an account with a Mass Save utility, our written proposal, your signature on the authorization form, a yes from the lender and an inspection once work wraps up. We draft the proposal and sit with you through the forms. The lender makes the approval decision.
Do lower-income households get larger incentives?
They can. Mass Save runs an enhanced track for homes that meet its income limits, which scale with how many people live there, and the heat being replaced is usually oil, propane or electric resistance. Mention it early on the phone so the correct application gets started before design.
Do I have to insulate before I can get the rebate?
To earn the whole-home rebate, a house must first get the insulation and sealing its Home Energy Assessment recommends. The assessment lists the insulation and air sealing work, and that work is heavily subsidized by the program too. A partial-home system skips some of these rules but brings a smaller check.
What can the 2026 heat pump rebate be worth?
Up to $8,500 for a whole-home air-source heat pump system, paid per ton of installed capacity. Conditions apply. Weatherization per a Home Energy Assessment, qualifying cold-climate equipment and someone living in the house all winter are the big three. Covering only part of the house earns less.
Is a Home Energy Assessment required first?
For the whole-home rebate, and for a HEAT Loan on a whole-home project, yes. The assessment costs the homeowner nothing and shows what weatherization the house needs. We help you book it and plan the heat pump around what it finds.
What upkeep does a heat pump need?
Very little. Rinse the indoor filters on a regular schedule, clear drifting sand, leaves and snow away from the outside cabinet, and book a yearly look at coils and drain lines. A short walkthrough at startup shows you where everything is.
How is the rebate paid out, and who handles the forms?
The money comes after the job, figured on tons of capacity installed, once the program signs off on the paperwork. We prepare the rebate documents with you, gather the equipment details the program asks for and keep track until it clears. You review and sign; we do the legwork.
Which heat pumps qualify for Mass Save incentives?
Air-source units built for cold weather that appear on the Mass Save qualified list. The outdoor and indoor units have to be a matched pair on that list. We check the exact models against it before the proposal goes out, so the equipment and the rebate line up.
A Planner's Approach to Heat Pumps
HVAC Financing Nahant runs every job like a project plan. Heat loss first, then equipment, then the rebate and the loan, then the install. You see each number before the next step starts, and nothing gets ordered until the math makes sense to you.
See how we plan a job
Leave the Oil Truck Behind With One System
Heat in January, cooling in July, and a single system doing both. Tell us how the house is heated now and what bothers you about it. We will lay out the rebate, the 0% loan and your share, then size a system to match.
Working from Nahant out to the neighboring shore towns.