Radiator and baseboard homes
Ductless Mini-Splits in Nahant
Quiet indoor heads on the wall, floor or ceiling, tied to one outdoor unit, for heat and cooling in rooms that radiators and window units never quite handled.
Heat and Cooling Without Tearing Into Walls
Most older houses were never built for ductwork. Radiators, baseboard and a few window units did the job, more or less. Ductless mini-splits fix that without opening ceilings. A small line set runs from the outdoor unit through the wall to an indoor head. Each head heats and cools its own space, with its own setting.
That makes them a strong fit for capes with cold upstairs bedrooms, additions that never got a proper zone, finished attics, sunrooms and two-families where each unit wants its own control. They also make sense as the backbone of a whole-home system when the house has no ducts at all.
The design is the part that matters. Too many heads and you pay for capacity you will not use. Too few and the far rooms stay cold. We count heat loss room by room, then place heads where air can actually reach. Wall heads are the usual choice. Floor consoles suit rooms with low windows. Ceiling cassettes work where wall space is tight. Every model is checked against the Mass Save qualified list, so the rebate and the 0% HEAT Loan stay available.
What a Mini-Split Job Includes
The work behind a clean ductless install.
Room-by-room layout
Head count and placement worked out from each room's heat loss and how air moves through the house.
Wall, floor or ceiling heads
The right style for each room, chosen for comfort and for how the space is used.
Multi-zone or single-zone
One outdoor unit serving several heads, or separate units where that makes more sense.
Tidy line-set routing
Lines run through closets or covered on the exterior with neat channels that match the trim.
Condensate drainage
Drain lines pitched and routed so summer moisture leaves the house without trouble.
Per-room controls
Each head set up with its own remote or wall control, and a walkthrough of the modes.
Ductless, Start to Finish
Walk the rooms
Every room checked for wall build, window area and a sensible outdoor unit spot.
Lay out the heads
A written plan with head locations, equipment, price, rebate estimate and any loan amount.
Install and set up
Heads mounted, lines run and sealed, the system tested and every control explained.
Why Our Ductless Layouts Work
Sized per room
Each head matched to its room's load, so bedrooms are not blasted and the den is not left chilly.
Cold-night performance
Units rated to keep putting out heat through a raw coastal January.
Neat on the outside too
Line covers and unit placement planned so the house still looks right from the street.
- No ductwork needed
- Heat and cooling per room
- Qualified cold-climate models
- Rebate and loan eligible
Which Room Fights You Every Season?
Name the rooms that freeze in winter or bake in summer and what heats them today. Expect a sketch of a head layout and the numbers behind it.